Skip to main content

← All opportunities

HEALTH AND HUMAN SERVICES, DEPARTMENT OF › NATIONAL INSTITUTES OF HEALTH › NATIONAL INSTITUTES OF HEALTH OLAO

Preventative Maintenance and Service Support for Miltenyi Biotec CliniMACS Plus Instruments

Key facts

Response deadline
Nov 4, 2026
7:00 AM UTC-05:00
Set-aside
Not stated
Notice type
Presolicitation
Posted on SAM.gov
Oct 26, 2026
Archives Nov 5, 2026

Description

Show the full description
The National Institutes of Health (NIH), Clinical Center (CC), Department of Transfusion Medicine (DTM), Center for Cellular Engineering (CCE), intends to procure preventative maintenance and service support for seven (7) Miltenyi Biotec CliniMACS Plus instruments from Miltenyi Biotec, Inc. The requirement supports the continued operation of critical cell-processing equipment used in manufacturing patient-specific cellular therapies for patients enrolled in clinical trials at the NIH Clinical Center. CCE manufactures cell-based therapies under Food and Drug Administration (FDA)-regulated Current Good Manufacturing Practice (cGMP) conditions. The requirement includes preventative maintenance, calibration, inspections, software updates, diagnostic testing, troubleshooting, repair support, replacement of proprietary service parts, and technical support for CliniMACS Plus instruments bearing serial numbers 2600, 2602, 2632, 2635, 2634, 2619, and 2756. These services are necessary to maintain equipment reliability, validated manufacturing processes, and compliance with applicable FDA regulations, including 21 CFR 211.63 and 21 CFR 211.67. Basis for Intended Sole Source Miltenyi Biotec, Inc., is the original equipment manufacturer and the only known authorized provider capable of performing the required preventative maintenance, calibration, and technical support services for the CliniMACS Plus instruments.End of the preview. Use “Show the full description” above to read all of it.

The National Institutes of Health (NIH), Clinical Center (CC), Department of Transfusion Medicine (DTM), Center for Cellular Engineering (CCE), intends to procure preventative maintenance and service support for seven (7) Miltenyi Biotec CliniMACS Plus instruments from Miltenyi Biotec, Inc. The requirement supports the continued operation of critical cell-processing equipment used in manufacturing patient-specific cellular therapies for patients enrolled in clinical trials at the NIH Clinical Center.

CCE manufactures cell-based therapies under Food and Drug Administration (FDA)-regulated Current Good Manufacturing Practice (cGMP) conditions. The requirement includes preventative maintenance, calibration, inspections, software updates, diagnostic testing, troubleshooting, repair support, replacement of proprietary service parts, and technical support for CliniMACS Plus instruments bearing serial numbers 2600, 2602, 2632, 2635, 2634, 2619, and 2756. These services are necessary to maintain equipment reliability, validated manufacturing processes, and compliance with applicable FDA regulations, including 21 CFR 211.63 and 21 CFR 211.67.

Basis for Intended Sole Source

Miltenyi Biotec, Inc., is the original equipment manufacturer and the only known authorized provider capable of performing the required preventative maintenance, calibration, and technical support services for the CliniMACS Plus instruments. The equipment incorporates proprietary software, diagnostic tools, replacement parts, and manufacturer-specific technical requirements that are not available to unauthorized third-party service providers.

The seven instruments have been qualified and incorporated into validated manufacturing processes supporting patient-specific cellular therapies. Utilizing an alternate service provider without the required manufacturer authorization, proprietary software access, and technical expertise could compromise equipment performance, jeopardize regulatory compliance, and require costly requalification activities. Any disruption to these critical instruments could delay manufacturing operations and patient treatment schedules.

Accordingly, NIH intends to award this requirement to Miltenyi Biotec, Inc., on a sole-source basis to ensure continued operational readiness and compliance with FDA-regulated manufacturing requirements.

The proposed contractor is:

Miltenyi Biotec, Inc.

Capability Statements

This notice is not a request for competitive quotations or proposals. However, responsible sources that believe they can satisfy the Government's requirement may submit a capability statement demonstrating their ability to provide the required preventative maintenance, calibration, and service support for the seven Miltenyi Biotec CliniMACS Plus instruments.

Capability statements should clearly demonstrate the vendor's technical qualifications, manufacturer authorization, access to proprietary diagnostic software and replacement parts, and ability to perform the required services in accordance with applicable FDA and cGMP requirements. Vendors must also demonstrate their ability to maintain the instruments' validated operating conditions and provide preventative maintenance reports for review by the CCE Quality Assurance team.

All capability statements must be received no later than November 4, 2026, at 7:00 AM Eastern Time (ET).

The Government will consider all responses received by the stated deadline. A determination not to compete this proposed acquisition based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for determining whether to conduct a competitive procurement.

No solicitation package is available at this time. This notice does not constitute a solicitation, and the Government will not reimburse respondents for costs associated with preparing or submitting a response.

Contacts

Attachments

No attachment links are available here.

Record dates

Posted on SAM.gov: Oct 26, 2026
The agency’s publication date, as SAM.gov states it.
First recorded by BidLookup: Oct 26, 2026
The UTC day of the first read of SAM.gov’s listings that stored this notice.
Last confirmed: Nov 3, 2026
The UTC day of the latest read that still listed this notice. It does not mean the notice is unchanged or still open on SAM.gov now, and it is not the index’s last-read time.

Published by the agency on SAM.gov as notice cff896238b724d7b81883993be5a239d. What these dates mean

Record

Solicitation number
27-000190
Search the index for this number
NAICS
811210 · Electronic and Precision Equipment Repair and Maintenance
Product/service code
J066 · MAINT/REPAIR/REBUILD OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT
Place of performance
Bethesda, Maryland 20892
Contracting office
BETHESDA, MD 20892
SAM.gov notice ID
cff896238b724d7b81883993be5a239d