DEPT OF DEFENSE › DEFENSE LOGISTICS AGENCY › DLA MARITIME › DLA MARITIME SHIPYARDS › DLA MARITIME - PORTSMOUTH
BUSHING BEARING
Key facts
- Response deadline
- Nov 25, 2026
- 4:00 PM UTC-05:00
- Set-aside
- SBASmall business (total)
- Small Business Set Aside - Total
- Notice type
- Combined synopsis/solicitation
- Posted on SAM.gov
- Nov 19, 2026
- Archives Dec 10, 2026
Description
Show the full descriptionShow less
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. The RFQ number is SPMYM327Q8009. This solicitation documents and incorporates provisions and clauses in effect through FAC 2026-01 March 13, 2026 and DFARS Change Notice 20260702. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at this address:
https://www.ecfr.gov, https://www.acquisition.gov/content/list-sections-affected, and http://www.acq.osd.mil/dpap/dars/change_notices.html
The FSC Code is 5365 and the NAICS code is 332722. The Small Business Standard is 600. This requirement is being processed utilizing 100% Small Business Set-Aside.
Evaluation criteria is Lowest Price Technically Acceptable (LPTA). SPRS will be used to determine vendor responsibility. Potential contractors will be screened for responsibility in accordance with FAR 9.104.
*** IF REQUESTING DRAWING, A FILLED OUT AND SIGNED SECURITY AGREEMENT AND APPROVED JCP 2345 IS REQUIRED ***
The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing:
CLIN 0001: BUSHING 4 EA __________ ___________
BUSHING: RBC SOUTHWEST PRODUCTS INC
P/N DBSF-32-130 or equivalent, Item#53 of Drawing
6015998 Rev-F Bushing, with dyphlon plastic alloy
liner, south west products co. , body dia. 2.3775", bore
dia. 2.50050", body overall length 2.375” with stainless
retainer
FAR CLAUSES AND PROVISIONS
Clause/Provision
Title
52.203-19
Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements
52.204-7
System for Award Management
52.204-13
System for Award Management Maintenance
52.209-10
Prohibition on Contracting with Inverted Domestic Corporations
52.209-11
Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law
52.209-6
Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment
52.211-15
Defense Priority and Allocation Requirements
52.212-1
Instructions to Offerors—Commercial Products and Commercial Services
52.212-2
Evaluation—Commercial Products and Commercial Services
52.212-4
Contract Terms and Conditions—Commercial Products and Commercial Services
52.219-6
Notice of Total Small Business Set-Aside
52.219-28
Post-Award Small Business Program Representation
52.222-3
Convict Labor
52.222-19
Child Labor—Cooperation with Authorities and Remedies
52.222-50
Combating Trafficking in Persons
52.222-90
Addressing DEI Discrimination by Federal Contractors
52.223-11
Ozone-Depleting Substances
52.226-8
Encouraging Contractor Policies to Ban Text Messaging While Driving
52.232-33
Payment by Electronic Funds Transfer—System for Award Management
52.232-39
Unenforceability of Unauthorized Obligations
52.232-40
Providing Accelerated Payments to Small Business Subcontractors
52.233-3
Protest after Award
52.233-4
Applicable Law for Breach of Contract Claim
52.240-90
Security Prohibitions and Exclusions Representations and Certifications **See attached clauses and provisions for full text**
52.240-91
Security Prohibitions and Exclusions **See attached clauses and provisions for full text**
52.240-91 Alt 1
Security Prohibitions and Exclusions (Alt I)
52.240-92
Security Requirements
52.240-93
Basic Safeguarding of Covered Contractor Information Systems **See attached clauses and provisions for full text**
52.242-15
Stop-Work Order
52.242-17
Government Delay of Work
52.243-1
Changes—Fixed Price
52.247-34
F.o.b. Destination
52.252-1
Solicitation Provisions Incorporated by Reference **See attached clauses and provisions for full text**
52.252-2
Clauses Incorporated by Reference **See attached clauses and provisions for full text**
52.252-5
Authorized Deviations in Provisions **See attached clauses and provisions for full text**
52.252-6
Authorized Deviations in Clauses **See attached clauses and provisions for full text**
DFARS CLAUSES AND PROVISIONS
Clause/Provision
Title
252.203-7000
Requirements Relating to Compensation of Former DoD Officials
252.203-7002
Requirement to Inform Employees of Whistleblower Rights
252.203-7005
Representation Relating to Compensation of Former DoD Officials
252.204-7003
Control of Government Personnel Work Product
252.204-7004
Antiterrorism Awareness Training for Contractors
252.204-7008
Compliance with Safeguarding Covered Defense Information Controls
252.204-7012
Safeguarding Covered Defense Information and Cyber Incident Reporting
252.204-7015
Notice of Authorized Disclosure of Information for Litigation Support
252.204-7016
Covered Defense Telecommunications Equipment or Services--Representation
252.204-7017
Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services--Representation
252.204-7018
Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services
252.240-7997
NIST SP 800-171 DoD Assessment Requirements.
252.204-7021
Contractor Compliance with the Cybersecurity Maturity Model Certification Level
252.204-7024
Notice on the use of the Supplier Performance Risk System
252.204-7025
Notice of Cybersecurity Maturity Model Certification Level Requirements
252.211-7003
Item Unique Identification and Valuation
252.215-7013
Supplies and Services Provided by Nontraditional Defense Contractors
252.223-7001
Hazard Warning Labels
252.223-7008
Prohibition of Hexavalent Chromium
252.225-7000
Buy American--Balance of Payments Program Certificate—Basic
252.225-7001
Buy American and Balance of Payments Program—Basic
252.225-7002
Qualifying Country Sources as Subcontractors.
252.225-7012
Preference for Certain Domestic Commodities
252.225-7048
Export-Controlled Items
252.225-7059
Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region–Representation
252.225-7060
Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region
252.232-7003
Electronic Submission of Payment Requests and Receiving Reports
252.232-7006
Wide Area WorkFlow Payment Instructions **See attached clauses and provisions for full text**
252.232-7010
Levies on Contract Payments
252.244-7000
Subcontracts for Commercial Products or Commercial Services
5452.233-9001
Disputes: Agreement To Use Alternative Dispute Resolution (ADR) **See attached clauses and provisions for full text**
DLA PROCUREMENT NOTES (See Attachment for Full Text)
C01 Superseded Part Numbered Items (FEB 2025)
C02 Manufacturing Phase-Out or Discontinuation of Production, Diminishing Sources, and Obsolete Materials or Components (DEC 2016)
C03 Contractor Retention of Supply Chain Traceability Documentation (JUN 2023)
C04 Unused Former Government Surplus Property (SEP 2021)
C14 Repackaging or Relabeling to Correct Deficiencies (MAY 2020)
C20 Vendor Shipment Module (VSM) (MAY 2026)
E05 Product Verification Testing (MAY 2020)
H10 Requires No Access to DLA Controlled Technical Data or Information for Contract Performance (MAY 2024)
L04 Offers for Part Numbered Items (SEP 2016)
L06 Agency Protests (DEC 2016)
L08 Use of Supplier Performance Risk System (SPRS) in Past Performance Evaluations (JUN 2024)
L09 Reverse Auction (OCT 2016)
L10 Competing Individual Delivery Orders Through Reverse Auctions (OCT 2016)
L31 Additive Manufacturing (JUN 2018)
L39 Cybersecurity Maturity Model Certification (CMMC) CMMC Level 1 Self-Assessment Requirement for Federal Contracting Information (FCI) (NOV 2025)
M05 Evaluation Factor for Unused Former Government Surplus Property (SEP 2016)
M06 Evaluation of Offers for Part Numbered Items (SEP 2016)
LOCAL CLAUSES (See Attachment for Full Text)
YM3 A1: Additional Information
YM3 A3: Government Purchase Card Method of Payment Additional Info (When GCPC Payment)
YM3 C500: Mercury Control (Supplies)
YM3 C528: Specification Changes
YM3 D2.2: Marking of Shipments
YM3 D4: Preparation for Delivery
YM3 D8: Prohibited Packing Materials
YM3 E2: Disposition of Non-Conforming Material
YM3 F500: Consignment Instructions for Deliveries to the Portsmouth Naval Shipyard
This announcement will close 11/25/2026 at 04:00 PM EST. The Point of Contact for this solicitation is Sam Aiguier who can be reached at [email protected]. All responsible sources may submit a quote which shall be considered by the agency.
System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed online at http://www.sam.gov/.
If not the actual manufacturer the manufacturer’s name, location, and business size must be provided.
Please submit quotes via email to: [email protected], and [email protected]
All quotes shall include price(s), FOB point, Cage Code, a point of contact, name and phone number, GSA contract number if applicable, business size under the NAICS Code, whether or not your company prefers payment by Government Commercial Purchase Card (GCPC)* or Wide Area Workflow (WAWF). Please note that the Government’s terms for payment for this requirement are Net 30 Days AFTER acceptance of material. Please note, if selecting GPC, the Government does NOT utilize third party payment entities (Zelle, Venmo, Paypal, etc.) Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
*If selecting GCPC as the preferred method of payment, please be advised that per DFARS 232.7002, a receiving report MUST be entered into WAWF.
Contacts
Sam Aiguier · primary
DLA-KME PNSY EMAIL BOX · secondary
Attachments
BidLookup records the links this notice gives. It has not downloaded or checked the files.
Record dates
- Posted on SAM.gov: Nov 19, 2026
- The agency’s publication date, as SAM.gov states it.
- First recorded by BidLookup: Nov 19, 2026
- The UTC day of the first read of SAM.gov’s listings that stored this notice.
- Last confirmed: Nov 19, 2026
- The UTC day of the latest read that still listed this notice. It does not mean the notice is unchanged or still open on SAM.gov now, and it is not the index’s last-read time.
Published by the agency on SAM.gov as notice 5a0461940bfe469e917458f4587fa723. What these dates mean
Record
- Solicitation number
- SPMYM327Q8009
- Search the index for this number
- NAICS
- 332722 · Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Product/service code
- 5365 · BUSHINGS, RINGS, SHIMS, AND SPACERS
- Place of performance
- Kittery, Maine 03904
- Contracting office
- PORTSMOUTH, NH 03801-5000
- SAM.gov notice ID
- 5a0461940bfe469e917458f4587fa723